Ge 80ng & ngs-yc4gn135-m-en
I-80NG / 80NGS
Isethi ye-generator yemvelo yemvelo
Ukucushwa okuyinhloko nezici:
• Injini esebenza kahle kagesi. & I-ac synchronous alternator.
• Isitimela sokuphepha kwegesi kanye nedivaysi yokuvikela igesi ngokulwa nokuvuza.
• Uhlelo lokupholisa olufanelekile lokushisa okukhona kuze kube ngu-50 ℃.
• Ukuhlolwa kwesitolo okuqinile kuwo wonke ama-gensets.
• I-Industrial Silencer enekhono lokuthulisa le-12-20DB (a).
• Uhlelo Lokulawula I-Event Advanced: Uhlelo lokulawula i-ECI kufaka phakathi: Uhlelo lokulahla, uhlelo lokulawula i-detenation, uhlelo lokulawula isivinini, uhlelo lokuvikela, uhlelo lokulawulwa komoya, i-air / fuel ratio control system kanye ne-cylinder temp.
• Ngohlelo olupholile kanye nokushisa lokushisa ukuze uqiniseke ukuthi iyunithi ingasebenza ngokujwayelekile ekushiseni kwemvelo okungu-50 ℃.
• Ikhabethe elizimele elizimele lokulawula ukulawulwa kude.
• Uhlelo lokulawula okusebenzayo okuningi ngokusebenza okulula.
• Izindawo zokuxhumana zedatha ezihlanganiswe ohlelweni lokulawula.
• Ukuqapha i-Battery Voltage futhi ishaja ngokuzenzakalelayo.
| Idatha yohlobo lweyunithi | |||||||||||||||
| Uhlobo lwamafutha | Igesi yemvelo | ||||||||||||||
| Uhlobo lwemishini | I-80NG / 80NGS | ||||||||||||||
| Umbuthano | Ukunikezwa kwamandla kagesi + Isistimu yokuhlanza ukushisa + iKhabhinethi | ||||||||||||||
| Ukuhambisana ne-GESET ngezinga | I-ISO3046, ISO8528, GB2820, CE, CSA, Ul, | ||||||||||||||
| Ukuphuma okuqhubekayo | |||||||||||||||
| Ukushintshwa kwamandla | 50% | 75% | I-100% | ||||||||||||
| Okukhishwa ngogesi | kW | 40 132 | 60 185 | 80 239 | |||||||||||
| Ukusetshenziswa kwamafutha | kW | ||||||||||||||
| Ukusebenza kahle kwimodi yokufana kwe-mains | |||||||||||||||
| Ukuphuma okuqhubekayo | 50% | 75% | I-100% | ||||||||||||
| Ukusebenza Kagesi% | 30.5 | 32.5 | 33.4 | ||||||||||||
| Okwamanje (a) / 400V / F = 0.8 | 73 | I-108 | 144 | ||||||||||||
Isitatimende Esikhethekile:
1. Idatha yezobuchwepheshe isuselwa kugesi yemvelo ngenani le-10 kWh / NM³ ne-Methane no. > 90%
2. Idatha yezobuchwepheshe ekhonjisiwe isuselwa ezimweni ezijwayelekile ngokusho kwe-ISO8528 / 1, ISO3046 / 1 ne-BS5514 / 1
I-3. Idatha yezobuchwepheshe ilinganiswa ngezimo ezijwayelekile: Ingcindezi Esezingeni Lomoya Esezulu: I-100KPA Amiite Lokushisa: I-25 ° C RIPLATE ALY AROR AIRADITITITITITITITITIT: 30%
I-4. Ukulinganiswa kwezimo ezimweni ezi-ambient ngokusho kwe-DIN ISO 3046 / 1.Ukubekezelelana kokusetshenziswa kwamafutha athile kungukuthi ama-5% okukhishwa okulinganiselwe.
I-5. Isilinganiso nesisindo esingenhla senzelwe umkhiqizo ojwayelekile futhi kungahle kube ngaphansi kokushintsha. Njengoba le dokhumenti isetshenziselwa kuphela ireferensi ye-presale, thatha ukucaciswa okunikezwe ngesenzo esihle ngaphambi koku-oda njengokugcina.
I-6. Izinga lokushisa elikhona elisebenzayo lingu-30 ° C ~ 50 ° C; Lapho izinga lokushisa elizwakalayo lidlula ama-40 ° C, amandla alinganiselwe ancishiswa ama-3% kuwo wonke amazinga okushisa angu-5 °. Ukuphakama okusebenzayo kungaphansi kwamamitha ayi-3000; Lapho okuphakama kudlula amamitha angama-500, amandla akalwe ancishiswa ngo-5% kuwo wonke amamitha angama-500 okuphakama.
Prime Power Ukusebenza Imodi Exedited Mode
| I-Synchronous alternator | Star, 3p4h | ||||||||||
| Ubuningi bokwenzeka | Hz | 50 | |||||||||
| Isici Power | 0.8 | ||||||||||
| Isilinganiso (F) Power Prime Power | Isihloko Ezinhle | 100 | |||||||||
| Voltage voltage | V | I-380 | 400 | 415 | 440 | ||||||
| -Dlulayo | A | 152 | 144 | 139 | 131 | ||||||
| Idatha yokusebenza kwe-Genset kanye nobuchwepheshe bokukhiqiza | ||||||||||
| Ukulayisha ngokweqile ngesikhathi ku-1.1XSE (ihora) | 1 | Isici sokuphazamiseka ngocingo (TIF) | ≤50 | |||||||
| Ukwanda Kwe-Voltage Settised | ≥ ± 5% | Ngocingo oluvumelanayo (thf) | ≤2%, njenge-PERBS4999 | |||||||
| Ukuphambuka kwe-voltage eqinile | ≤ ± 1% | Ubuchwepheshe Bokukhiqiza
Amazinga nesitifiketi
| ||||||||
| Ukuchezuka kwamandla kagesi | -15% ~ 20% | |||||||||
| Isikhathi Sokubuyiselwa Kwe-Voltage | ≤4 | |||||||||
| I-Voltage Imbali | 1% | |||||||||
| Ukulawulwa kwemvamisa okuqinile | ± 0.5% | |||||||||
| I-Transsuent -State Frequency Regulation | -15% ~ 12% | |||||||||
| Isikhathi Sokubuyiselwa Kwemvamisa | ≤3 | |||||||||
| I-Stand-State Frequency band | 0.5% | |||||||||
| Ukuphendula kwesikhathi (s) | 0.5 | |||||||||
| Line Voltage Waveform Sine Direction Direction | ≤ 5% | |||||||||
| Imininingwane yokuphuma[1] | ||||||||||
| Izinga lokugeleza komoya | 534 kg / h | |||||||||
| Lokushisa lokushisa | 520 ℃ | |||||||||
| Ingcindezi enkulu ye-Back Back | I-2.5KPA | |||||||||
| Ukuphuma: (inketho) nox: | ≤500 mg / nm³ ku-5% oxygen oxygen | |||||||||
| CO | ≤600 mg / nm³ ku-5% oxygen oxygen | |||||||||
| I-NMHC | ≤125 mg / nm³ ku-5% oxygen oxygen | |||||||||
| H2s | ≤20 mg / nm3 | |||||||||
| Umsindo wezemvelo | ||||||||||
| Izinga lengcindezi yomsindo ebangeni elifinyelela ku-1 m (kususelwa endaweni ezungezile) | I-84DB (a) / Uhlobo Oluvulekile 70DB (a) / Uhlobo oluthule | |||||||||
.
| IgesiUmbhalo | ||
| Amalahle | [1] Igesi yemvelo | |
| Ingcindezi yokudla igesi | I-5KPA ~ 50KPA | |
| Okuqukethwe kwevolumu ye-Methane | ≥ 80% | |
| Inani eliphansi lokushisa (LHV) | Hu ≥ 31.4mj / nm3 | |
| Ukusetshenziswa kwegesi ngehora ku-50% LOADAT 75% umthwalo ku-100% umthwalo | 13.5 m3 19.5 m3 25 m3 | |
| [1] Ngemuva kokuthi izakhi zegesi zemvelo zidinga ukuhlinzekwa ngabasebenzisi, idatha efanele yencwadi yezobuchwepheshe izovuselelwa.gas hoses yi-ECER110 evunyelwe. Izakhi ku-Gas Train Hlangana Neziqondiso 90/356 / EWG. | ||
| Ukusebenzela | ||
| Ileveli kawoyela (lokushisa okukhona liphakeme kunesisusa esingu-5 ° C / izinga lokushisa likhona [2] liphansi kune-minus 5 ° C) |  I-API 15W-CF4 / API 10W-30 CF4 | |
| Ukugcoba umthamo kawoyela min./max. | 17 l / 18 l | |
| Umthamo opholile | 40 l | |
| Uhlobo olupholile | Amanzi angama-50% athambile kanye nama-50% ama-anti-freezing solution (i-ethylene glycol, enokuqoqwa kwesisombululo sokulwa nokuqina phakathi kuka-40% -68%) | |
| Ukungena komoya kwamagumbi okufaka (ukugeleza komoya we-inlet) | > 8500 m³ / h | |
[2] Isilinganiso samafutha sisho izici ezinjengokushisa kwasendaweni nokucindezela komoya.
| Idatha yokusebenza kwe-AC Alternator | Injini esebenza kahle yegesi | |||||
| Uhlobo lomkhiqizo | Mecc Alte | Uhlobo lwenjini | YC | |||
| I-typevoltage (V) | ICO34-1L / 4 | Uhlobo lwe-Modengine yenjini | Yc4d90nl-d30 Ama-4 cylinders inline, eqeda i-turbocharger ene-turbine enamanzi yokulwandlu | |||
| I-380 | 400 | 415 | 440 | |||
| Isilinganiso (h) ama-KW Prime Power | I-108 | I-108 | I-108 | 91 | I-Bore X Stroke (mm) | I-112mm × 132mm |
| Isilinganiso (h) amandla amakhulu we-KVA | 135 | 135 | 135 | 114 | Ukuthutha (l) | 5.2 |
| I-Alternator Effecty (%) Power Factor | 92.8 | 92.9 | 92.6 | 92.4 | Amandla okuphuma avumelanayo | 11 90kw / 1500rpm |
| 0.8 | ||||||
| Ukuxhumeka kwe-wiring | D / y | Ukusetshenziswa kwamafutha max. (Kg / h) | 0.2 | |||
| Ikilasi lokufakwa kwe-rotor | H | Ukugeleza Kwezinsana Ukugeleza, (kg / h) | 514 | |||
| Isilinganiso sokushisa sokushisa | F Iklasi | Indlela yokulahla | I-Cylinderled Electronilly Cylinder Cylinder Independent High-Energy | |||
| Indlela yokubonisa | Ibhulashi-ngaphansi | Imodi yokulawula kaphethiloli | Ukuhlanganiswa okulinganayo, ukulawulwa kwe-loop okuvaliwe | |||
| Ijubane elilinganiselwe (min-1Isihlehlukene | I-1500 | Imodi yokulawula isivinini | Umbusi we-elekthronikhi | |||
| Ukuvikelwa Kwezindlu | IP23 | |||||
I-Alternator Ukulandela I-AGCB755, BS5000, VDE0530, Nemamg1-22, IED34-1, CSA22.2 ne-AS1359 Ejwayelekile.
Uma kwenzeka ukwehluka kwe-voltage Voltage Voltage ngo- ± 2 2%, kumele kusetshenziswe i-Voltage Regulator (AVR ezenzakalelayo (AVR).
| Ububanzi bokunikezwa | ||||||
| Umshini | I-alternater I-canopy nesisekelo IKhabhinethical | |||||
| I-Gashigvenign Efhigbign Systembda Controllerelectronic Governor Tradert StartBorelecty System | I-AC Alternatorth Class Insurator ProuratorPF control control | I-Sheel Sheel Base Foradetine Bracketvibration I-IsolatorsProundproof (Okokuzithandela) Ukuhlunga Uthuli (Okokuzithandela) | I-Air Circuit Breaker7-Inch Touch ScreenCommunication interfaces Shintsha kagesi iKhabhonethi yeKhabishini ishaja | |||
| Uhlelo lokuhlinzeka ngegesi | Uhlelo lwe-lubrication | Voltage ejwayelekile | Ukungeniswa / uhlelo lokuqeda amandla | |||
| Igesi Yokuphepha Traingas Ukuvutha Ukuvikelwa / Ukuxubha Kwamafutha | Ithangi lamafutha e-oyili le-auxiliary | 380 / 220v400 / 230v415 / 240V | I-Air FilterExhast Silenceerxhast Bellows | |||
| Isitimela segesi | Insiza kanye nemibhalo | |||||
| I-Manual Cut-off Valve2 ~ 7kpa Pressure Pressure Gaugegas VilterSAfety valveroid valve (uhlobo lokulwa ne-anti-expression luyakhethwa | I-OperationAllaltaltaltaltaltaltationatation kanye ne-Operation Manual Manual Gas QualityMaightMaintHind Manual System Manual After Service GuideParts Manual Standard Packark Manual | |||||
| Ukucushwa okukhethwa kukho | ||||||
| Umshini | I-alternater | Uhlelo lwe-lubrication | ||||
| I-Coorse Air Fillessback SATEFFITE SALTREALL TOLTAGE HELWE | I-Generator Brand: Stamford, Leroy-Somer, MecCitchems Ukuphikisana nomswakama kanye nokugqwala | Ithangi elisha le-oyili elinomdlandla wokusetshenziswa kwama-gamelualioliolioliali adla i-heater ye-gaugefuel heater | ||||
| Uhlelo lukagesi | Uhlelo lokuhlinzeka ngegesi | Amandla kagesi | ||||
| Inzwa yokulawula kude yegridi yokulawula kude | Igesi Flow Gaugegas Fielgas filltrationredration gas desterment arm ye-alamu yokuhlekisa | I-220v230v240v | ||||
| Insiza kanye nemibhalo | Uhlelo lokuqeda | Uhlelo lokushintshana lokushisa | ||||
| Ukusebenza kwamathuluzi wensiza kanye izingxenye zensiza | Isihlangu Esincane Sokuguqula I-Catalytic | Ithangi eliphuthumayo le-radiatectric herheat temploet Tank Tank | ||||
Uhlelo lokulawula i-SAC-200
Uhlelo lokulawula oluhlelekile lumukelwa ngesibonisi sokuthinta isikrini, kanye nemisebenzi ehlukahlukene, kufaka phakathi: ukuvikela injini nokulawula, ukufana phakathi kwama-grid noma amagridi, kanye negridi yemisebenzi. njll.
Izinzuzo eziphambili
→ isilawuli se-premium gen-set controller for worle kanye nama-gensets amaningi asebenza kokubekwe eceleni noma izindlela ezihambisanayo.
→ Ukuxhaswa kwezicelo eziyinkimbinkimbi zokukhiqizwa kwamandla ezikhungweni zedatha, izibhedlela, amabhange kanye nezicelo ze-CHP.
→ Ukuxhaswa kwezinjini zombili ezineyunithi ye-elekthronikhi - Izinjini ze-ECU nezemishini.
→ Ukulawulwa okuphelele kwenjini, i-alternator kanye nobuchwepheshe obulawulwayo kusuka kuyunithi elilodwa kunikeza ukufinyelela yonke idatha elinganisiwe ngendlela ehambisanayo nangesikhathi esihambisanayo.
→ Uhla olubanzi lwezinto zokuxhumana luvumela ukuhlanganiswa okubushelelezi kuzinhlelo zokuqapha zasendaweni (BMS, njll.)
→ I-Internal Langaphakathi I-PLC Interpreter ikuvumela ukuthi ulungiselele i-logic eyenziwe ngokwezifiso ukuze uhlangabezane nezidingo zamakhasimende ezifuna ngokwakho ngaphandle kolwazi olungeziwe lwezinhlelo nangendlela esheshayo.
→ Ukulawulwa okukude okukude kanye nensizakalo
→ ukuqina okuthuthukisiwe nokuphepha
| Imisebenzi eyinhloko | |||||
Umsebenzi we-Injini Wokuvikelwa Kwenjini
Isimo esiphuthumayo
Injini yokuqapha: Okupholile, ukuthambisa, ukudla, ukuqeda amandla I-Voltage ne-Power Factor control | I-12V noma i-24V DC Startingremote I-interface yokulawula yokulawula / yokulawula i-Strategy Fight / Output, Alarm kanye nama-Timenueutos Ukulawulwa Kwemva Kwebhethri Voltage Stoppect ne-IP44Gas Ukuvuza Ukutholwa | ||||
| Ukucushwa Okujwayelekile | |||||
| Ukulawulwa kwenjini: ILambda ivaliwe ye-Loop ContrignIgnition systelelectronic gum actuatorstart Up control Speed Speed Speed Control control control control | Isilawuli se-Generator: Ukulawulwa kwamandla okulawula amandla | I-Voltage Tracking (Synchronous) Ukulawulwa kweVoltage Control (imodi yesiqhingi) Ukusatshalaliswa kwamandla okusebenzayo (imodi yesiqhingi) | Ezinye izilawuli:Ukugcwalisa Amafutha Ukulawula Ukulawulwa Kwe-Valve Controlfan | ||
| Ukuqapha Kwasekuqaleni Kwesexwayiso | |||||
| Idatha yeVetright Voltagealogy: U, I, HZ, KW, KVA, KVAR, PF, KWH, Imvamisa ye-KVAHGEENT | Injini i-Speedengine Running timeinlet tressure yokushisa umfutho | Okupholile okuthe xaxa kokuqukethwe komoya-mpilo ekuhlolweni kwesimo sokuphelisa | Ingcindezi yokushisa ye-coolant yokushisa yegesi | ||
| Ukuvikela Imisebenzi | |||||
| Ukuvikelwa kwenjiniIjubane eliphansi lokuvimbela ijubane / isivinini esifushane se-Speedstart | Ukuvikelwa kwe-alternator
| Busbar / Main Protection
| Ukuvikelwa kwesistimuUkuvikelwa kwe-Alarm Ukuvikelwa kwe-Fraentaturge | ||
| Upende, ubukhulu kanye nesisindo se-genset-80ng | |
| Usayizi we-Genset (Ubude * Ububanzi * Ukuphakama) mm | 2700 × 950 × 1720 |
| Isisindo esomile se-Genset (Uhlobo Oluvulekile) kg | I-1280 |
| Inqubo yokufafaza | I-Powder ephezulu ye-Poplam Coating (RAL 9016 & RAL 5017 & RAL 9017) |
| Upende, ubukhulu kanye nesisindo se-genset-800ngs | |
| Usayizi we-Genset (Ubude * Ububanzi * Ukuphakama) mm | Ngo-6091 × 2438 × 4586 (isitsha) / 2800 × 990 × 1800 (uhlobo lwebhokisi) |
| Isisindo Somile se-Genset (uhlobo oluthule) kg | I-9000 (isitsha) / 1850 (uhlobo lwebhokisi) |
| Inqubo yokufafaza | I-Powder ephezulu ye-Poplam Coating (RAL 9016 & RAL 5017 & RAL 9017) |
| Upende, ubukhulu kanye nesisindo se-genset | |
| Usayizi we-Genset (Ubude * Ububanzi * Ukuphakama) mm | 2700 × 950 × 1720 |
| Isisindo esomile se-Genset (Uhlobo Oluvulekile) kg | I-1280 |
| Inqubo yokufafaza | I-Powder ephezulu ye-Poplam Coating (RAL 9016 & RAL 5017 & RAL 9017) |
Ubukhulu bokubhekela kuphela.
I-50kw cogeneration Unit - I-Open Prey
